Sanyog Engineers



Computerised PC Base Wheel Aligner (Model Exact)


Computerised PC Base Wheel Aligner (Model Exact)

Professional PC Wheel Alignment

Basic Equipment:


The equipment comes equipped with a computer, 15" VGA colour monitor, key-board, 3.5" floppy disk drive, 2 or 4 sensor (measuring heads), a large storage cabinet, 80 column printer, infrared cordless remote control, turntables,sensor holders &other related parts.

  • Suitable for all cars & LCV's (additional accessories required for HCV alignment.)
  • Over 3000 target value memory locations with menu.
  • Theoretical reference data capacity for upto 10,000 vehicles in the memory.
  • An archive for calling up earlier measured data in the event of customer complaints.
  • Permanent system monitoring even during the measuring process.
  • Automatic fault display & on-line help button for all measuring and system functions.
  • All front & rear-wheel value for the measured-value printout are calculated in a single wheel alignment run.
  • Cordless remote control provided to enable the operator to operator the m/c from the steering wheel.
  • Live castor adjustment & simultaneous display of castor, camber & toe readings on one single screen.
  • 24 value measured from the steering wheel-rapidly & precisely with PCtechnology.
  • Automatic wheel run OUt display prevents incorrect measurements. Four point run out compensation for higher accuracy.
  • Alignment data display in figures and graphic form.


Technical Data

Display 15" colour screen with high resolution graphics
Display resolution Unlimited reference value input in degrees / minutes, degree / fractions, mm / decimals, mm / fractions, inches / decimals, inches / fraction
Wheel size range 10"-20"

Measuring Range with Accuracy

Total toe ±10' with ±10'
Individual toe ±5' with ±5'
Camber ±8' with ±8'
Driving Axis Angle ±5' with ±5'
Castor ±18' with ±10'
Kingpin Inclination ±18' with ±10'
Wheel setback ±5' with ±5'
Toe out on turns at 20 Steering Lock ±5' with ±5'
Fuli Wheel Lock ±60' with ±10'
Castor angle adjustment range ±10
Load capacity of Turntables 600 Kgs.
Load capacity of Sliding Support 600 Kgs.
Power supply 220V, 1 Phase